Tag Archives: compact

The Sony PXW-X70. Sometimes good things come in small packages!

The new Sony PXW-X70 XDCAM camcorder.
The new Sony PXW-X70 XDCAM camcorder.

Initial Thoughts.

As the owner of a Sony AX100, which is a really great little 4K and HD camcorder I wasn’t really all that excited when I saw the first prototype of the X70 at Broadcast Asia back in June. You see in the past Sony have done this many times, taken a high end consumer camcorder, updated the firmware, added a handle and then sold it for a higher price as a pro camcorder.  In the past, there has in reality been little difference between the cheaper consumer model and the more expensive pro version.

The handgrip on the Sony PXW-X70
The handgrip on the Sony PXW-X70

The PXW-X70 is different. This is much more than an AX100 with new firmware. For a start the body of the camera is quite different. The right hand side of the X70 is quite different to the AX100. It has a much fatter hand grip. This makes the camera much easier to hold comfortably for long periods. It also makes space for a full size HDSDI output and a full size HDMI output. But the differences don’t stop there.

On the top of the hand grip there is a large assignable button that is normally set to act as a control for the focus magnification function. This button falls immediately under your index finger when your shooting. In front of this is a new larger and easier to use zoom rocker and then in front of that is another assignable button, this one set as a one push auto iris button – very nice!

The back of the handgrip and the small joystick.
The back of the handgrip and the small joystick.

At the back of the handle there is a small joystick that ends up under your thumb (just where it needs to be). This joystick can be used to navigate through the cameras menu system. So, without taking your hand out of the hand grip you can check focus, zoom in and out, set your exposure and go through the menu system. If only it was this easy on all of Sony’s cameras! Ergonomically this camera is really good, especially when you consider how small it is.

The camera has a nice 12x stabilised, optical zoom lens, behind which sits a 1 inch 20 megapixel sensor. In video mode about 14 million pixels are used, so even in 4K (there will be a paid 4K upgrade option next year) there are more pixels than needed for full resolution. Rather than let this extra resolution go to waste you can activate Sony’s “clear image zoom” function that works seamlessly with the optical zoom to give you a 24x zoom range in HD.

Frame grab from PXW-X70. Click on the image to see the full size frame.
Frame grab from PXW-X70. Click on the image to see the full size frame.

The clear image zoom really is remarkably transparent. If you look hard enough at the image, on a big screen, when it’s zoomed all the way in you can just about discern a very slight softness to the image, but frankly I don’t think this is any worse than the softness you might see from a compact optical 24x zoom. It certainly doesn’t look electronic and unless you have side by side, with and without test clips I don’t think you would know that the clear image zoom has been used.

If 24x is not enough there is also a further digital extender, controlled by a button on the right side of the lens that doubles the digital zoom. This you can see, the image is a little degraded at 48x, but it’s not terrible, might be handy for a breaking news story where you can’t get close to the subject.

The left side of the PXW-X70
The left side of the PXW-X70

As well as the optical stabiliser in the lens the camera also has a switchable electronic stabiliser. The active steadyshot is very effective at smoothing out even the shakiest of hands. But it does tend to hang on or grab hold of the image a bit. So when you do deliberately move the camera it tends to try to stabilise the scene until it can no longer correct for the cameras movement at which point the scene is suddenly released and starts to move. If your using a tripod you definitely want to just use the standard steadyshot and not the active mode.

Dual SD card slots on the PXw-X70
Dual SD card slots on the PXw-X70

The pictures are recorded using either XAVC, AVCHD or standard definition DV to SD cards. For XAVC you must use SDXC cards, but these are cheap and readily available these days. There are two card slots and you can choose between relay record where the camera will switch from slot A to slot B once A is full, or you can make two simultaneous recordings on both cards at the same time. This gives an instant backup if you need it.

XAVC HD RECORDING:

The XAVC HD recordings are 10 bit 422 long GoP at 50Mb/s, 35Mb/s or 25Mb/s. The quality of the 50Mb/s recordings is amazing with no compression artefacts that I can see (there must be some, I just can’t see them). Even the 25Mb/s recordings look really good. You can shoot at up to 60fps in 60i mode and 50fps in 50i mode. In 60i mode you also have 24fps.

Frame grab form the PXW-X70, click on the image to see full size.
Frame grab form the PXW-X70, click on the image to see full size.

Considering this is a highly compact, single chip camera the images it produces are really very good. They don’t have that typical small sensor camera look. The pictures are remarkably noise free at 0db and largely free of artefacts. I tend to find that small handycams often suffer from what I would describe as “busy” pictures. Pictures where  perhaps there is a lot of added sharpening or where the pixels are read in special ways to make a sharp picture. This makes edges slightly flickery and gives the pictures a tell tale small sensor look. The X70 with it’s big sensor and abundance of pixels just doesn’t have this “busy” look.

Train sitting in station. Frame grab from PXW-X70
Train sitting in station. Frame grab from PXW-X70

The pictures really look like they come from a pro camera. Occasionally very fine, high contrast details like white text on a black background can look a little busy, but this is very minor. Dynamic range is quite respectable, it’s not as good as a PMW-300, but not too bad for a compact handycam (I estimate about 10 to 11 stops of DR).

One thing I did find with this camera is that because there is so little noise and the codec is so good, you could quite comfortably shoot about a stop darker than you would normally and then just bring the image up a bit in post. Shooting a little darker helps the camera handle bright highlights and then in post you can just bring up the shadows and mid tones with a simple colour correction to give a nice exposure. I wish I had realised this when I shot the demo video. I would have exposed a little on the dark side and then tweaked the shots in post. There’s so little noise at 0db and so few artefacts that the image holds up to this really well. If your using auto exposure you can set an exposure offset to allow for this in the menu.

PXW-X70 without the top handle fitted.
PXW-X70 without the top handle fitted.

The X70 is pretty sensitive and 9db of gain is quite useable, so shooting indoors in a typical home or at a wedding venue without extra lights should be no problem. Ramp it up to +33db and it see’s better in the dark than I do, but there is a fair bit of noise at +33db.

As well as being generally rather sensitive the PXW-X70 also has a nightshot mode that bypasses the cameras IR filter and includes a switchable infra-red light, so you can shoot in total darkness if you want.

To see what you are shooting there is a 3.5″ LCD panel. This panel is higher resolution than the one on the AX100 and gives a sharp and pretty accurate image. On the back of the camera there is a small OLED viewfinder. This little OLED is pretty good. It has great contrast and is pretty sharp for a small finder. It’s a great feature on bright sunny days when the LCD can become harder to see.

CRISP, SHARP IMAGES:

The HD images are crisp and sharp without any obvious sharpening, almost certainly a result of having a 4K ready sensor. The lack of obvious detail correction helps give the pictures a pleasing, more filmic look. The camera has picture profiles so if you want you can soften or sharpen the images if you choose. As well as detail and aperture controls there are also controls for gamma (standard, still, Cinematone1, Cinematone2, ITU709) and color. The color controls are similar to those on the FS700 where you can adjust the saturation as well as R, G, B, C, M, Y and K brightness. In addition there is a choice of 6 different preset color modes plus black and white.

PXW-X70 auto/manual switch.
PXW-X70 auto/manual switch.

The camera can be controlled either fully automatically or fully manual as well as various in between modes. There is a switch on the back of the camera to switch between auto and manual. In manual you can control the iris, shutter and gain by pressing one of three buttons along the bottom edge of the camera and the using a small wheel just below the lens to set what you have selected. In practice this actually works quite well. There is another button for white balance control on the side of the camera with the usual presets plus auto white balance. Just under the Manual/Auto switch there is a selector for the built in ND filters. I recently purchased a A7s DSLR type camera and I had forgotten what a fiddle it can be to use a camera that doesn’t have built in ND’s. So it’s really good to see proper ND filters on the PXW-X70 as they really help you manage your depth of field.

On the lens there is a single large control ring that can be used to focus the lens or to act as a manual zoom ring. The focus is responsive and although I don’t normally like round and round servo focus rings this one wasn’t too bad.

The zoom/focus ring on the PXW-X70.
The zoom/focus ring on the PXW-X70.

There really is so much to this camera that it would take a small book to go through all the features. For example there’s the touch screen LCD that can be used for touch to focus or touch to expose where you just touch the part of the screen you want to expose or focus on. There’s a full set of exposure and focus aids including peaking, histogram, zebras etc.

On the top of the camera you have Sony’s new MI shoe (Multi-Interface) for connecting accessories like the supplied handle with XLR audio inputs. The supplied detachable handle is really well made and very secure when attached. One small note is that by default when you attach the handle to the MI-shoe the camera switches to XLR audio automatically by default. So if you don’t actually have a mic connected to the handle you won’t have any audio as the internal mic gets shut off. You have to go in to the audio section of the menu to enable the internal mic if you want to use the handle but want to use the built in mic.

If you want to do time-lapse or slow stuff down the camera has S&Q motion that goes from 1fps to 60fps at 1920×1080.

The camera has WiFi and NFC and allows remote control via Content Browser Mobile and simply touching an NFC enabled phone or tablet against the side of the camera will pair the camera with the phone or tablet. In the future following a firmware update you will be able to use the camera to stream your content live via U-stream.

Finally – build quality. It’s really well made. It feels nice and solid, it feels like it will really last. Don’t tell Sony, but I dropped the camera from waist hight while I was using it. It survived, no problem at all.

Sony's new baby XDCAM camcorder, the PXW-X70.
Sony’s new baby XDCAM camcorder, the PXW-X70.

In conclusion: This is a nice little camera. It’s very easy to operate. The picture quality is very good for such a compact camera, the only thing that lets it down just a bit is the highlight handling. But the camera is so clean that you can afford to expose a little lower to compensate for this. Since shooting the demo video I have been playing with the picture profiles to help with the highlight exposure and I found that bringing up the black gamma really helps as it lifts the mid range allowing you to expose slightly lower.

The large sensor, combined with the switchable built in ND filters gives you much greater control over the depth of field than normally possible with a compact handycam.

I think you have to remember that this is a small camera. It isn’t a PXW-X180 and it never will be, but if your budget is tight and you want an easy to use compact camera this could be the one for you. I think it would be a good fit as a “B” camera or for use in lower budget corporate productions. In addition the PXW-X70 would be a good camera to give to PA’s and producers or to hand off to inexperienced shooters for fly-on-the-wall productions.

New compact XDCAM camcorder in development.

At last weeks Broadcast Asia trade show in Singapore, Sony revealed that they are working on a new highly compact XDCAM camcorder. They showed a prototype camera that was under a glass cover (which was a working unit).

Very few details are available at this time. The camera shown appears to be based on either the Sony AX100 4K camcorder or the similar CX900 HD camcorder. These both use a 1″, 20MP CMOS sensor that produces really rather good images (although it does suffer from a fair bit of skew/rolling shutter) and have 8 bit XAVC-S recording to SDXC or SDHC cards in 4K and HD in the AX100 and HD only in the CX900. This new camcorder will be able to record using 10 bit 422 XAVC long GoP, probably at 50Mb/s like the new PXW-X180. Whether it will also be able to record the XDCAM Mpeg2 codec is less clear, personally I suspect not.

This camera follows on from the Sony tradition of taking a top end compact consumer model, tweaking the recording codecs, adding a few more pro style features and adding an XLR input. So it’s no surprise to see this really. Given the great images from the CX900 and AX100 I would imagine that this new camcorder will pack quite a punch for such a small unit. The AX100/CX900 have a 12x optical zoom with image stabilisation and the ability to digitally increase the zoom range to 18x in 4K(AX100) and 24x in HD with very little loss of image quality.

EDIT: I Note that 1: There are no 4K badges on the camera body as the AX100 has. 2: The zoom range is noted as 24x on the camera body. This makes me suspect that this camera will be HD only.

Here are some pictures of the unit shown in Singapore.

IMG_1919

New, as yet un-named compact XDCAM camcorder. Left side
New, as yet un-named compact XDCAM camcorder. Left side
New, as yet un-named compact XDCAM camcorder. Right rear with SDI connector.
New, as yet un-named compact XDCAM camcorder. Right rear with SDI connector.
New, as yet un-named compact XDCAM camcorder. Right Side.
New, as yet un-named compact XDCAM camcorder. Right Side.
New, as yet un-named compact XDCAM camcorder. Top of the handle.
New, as yet un-named compact XDCAM camcorder. Top of the handle.
New, as yet un-named compact XDCAM camcorder. From the rear. Note that this unit actually works!
New, as yet un-named compact XDCAM camcorder. From the rear. Note that this unit actually works!

 

 

 

 

Sonnet QIO Review – Really, really fast!

Sonnet QIO

I had heard about the QIO some time ago, so I approached Sonnet to see if I could borrow a unit to review. I was given the loan of a Sonnet QIO at NAB. I have been playing with it since then and you know what, it’s a great device. So what exactly is it? Well it is an extension box that allows you to connect a range of peripherals and flash memory cards to your computer via the PCI bus. The reason I wanted to borrow one was because the QIO is one of the few devices (the only device?) that allows you to connect SxS, Compact Flash and P2 cards to a computer using the high speed PCI bus with hot-swappable functionality.  Hot Swap means you can eject and remove cards without having to re-boot the computer or do anything else, something that some of the other adapters on the market force you to do.

PCI-E extension board.

Installation was very straight forward. On my Mac Pro workstation I had to plug in a small PCI-X card into one of the vacant slots inside the rear of the machine. This is easy to do and should not put anyone off buying the device, it took me all of 5 minutes to plug the card in and install the drivers. Then a short cable runs from the back of the Mac Pro to the QIO and a separate power supply is plugged into the QIO for power.

 

 

 

On my Mac Book Pro I simply slotted the Sonnet express card PCI bus expansion adapter into the express card slot and then connected this to the main QIO unit via the extension cable and installed the drivers, again a 5 minute job, very simple.

PCI-E Express Card Slot adapter

If you do want to use it with a Mac Book Pro, you will need a model that has the express card slot. At the time of writing the device only works with Mac’s, but Windows support should be coming very soon. When buying a QIO there are two versions. The desktop version supplied with the desktop adapter or the laptop version with the express card slot adapter. The functionality is the same for both, it’s just a case of which adapter you need. You can buy the alternate adapter should you want both as an accessory.

So, I have it installed, how is it to use?

It’s really extremely straight forward. You simply pop your media into the slot and away you go. When your done with that card you eject it as you would with any other removable media and stick in the next card. On the workstation this was so much better than plugging in my XDCAM camcorder via USB.

Of course convenience is one thing, but how about performance? The QIO is fast, very fast. I was able to offload a full 16Gb SxS card in about 150 seconds, less than 3 minutes to the internal drive on the Mac Pro. That equates to an hours worth of XDCAM EX material in around 3 minutes or 20x real time. The performance for compact flash cards doesn’t disappoint either at around 15 seconds per Gb so clearly the transfer speed is limited by the speed of the CF card and not the connection as would be the case with USB or firewire. If you want to use the QIO for SD cards then you can use the supplied adapter. Again the performance is very good, but not as good as SxS and CF due mainly to the lower speeds of the SD cards.

Laptop Performance and Expansion.

One of the issues with Laptops is how do you expand them? It’s all very well being able to put an SxS card into the express card slot for fast off load, but where do you then put the material? On a Mac Book Pro you do have firewire 800 but this is still nowhere near as fast as the SxS card. As the SxS card is in the express card slot you can’t use it to add an eSATA drive, so your a little stuck. But not with the QIO. You see the QIO has a built in eSATA controller and 4 eSATA connectors on it’s rear. This means that you can plug in one or more eSATA drives to the QIO and transfer directly from the SxS card to an eSATA drive or drives. So now even on my Mac Book I can make multiple eSATA copies of my media at speeds of up to 200MB/s (total). So once again the speed is usually limited by the card and not the interface.

Torture Test:

For a real torture test I put two full 16Gb SxS cards into the QIO and offloaded both cards at the same time to the Mac Pro’s raid drive. Where one card had taken a little under 3 minutes, two cards took abut 190 seconds, just a little over 3 minutes. Transferred this way, two cards at a time you could offload 2 hours of XDCAM EX material in around 4 mins, that’s an incredible 30x real time. I tried the same test with CF cards  and again there was little difference in transfer speed between one card and two cards.

Conclusions:

This is one fast device. If you have lots of media to off-load and backup it’s going to save you a lot of time. If you are a production company that works with large volumes of solid state media it will pay for itself very quickly in saved man-hours. If your working in the field with a Mac Book Pro the ability to connect both the media and eSATA devices at the same time makes the QIO a very interesting proposition. It is well constructed, simple to install and use, what more could you ask for.

Value for money?

That’s a little harder to answer. It depends on how much material you work with. It’s a fairly pricey device at around $800US or £700GBP for a card reader, but the time savings are substantial, especially if you are asking people to back up material at the end of a days shoot. The faster it can be done, the more likely it is that it will be done straight away, rather than put off until later. It’s also a lot more than just a card reader, the eSATA ports make it so much more useful for connecting drives or even a raid array to a laptop. Overall I think it is actually well worth the investment for the time savings alone. 8/10 (it would have been 9/10 if it didn’t require the power adapter). Great product.

 

I approached Sonnet and requested a loan QIO for this review, which Sonnet provided. I was not paid to write this and the views expressed are entirely my own. Speed tests were conducted using my own SxS (blue) cards with the QIO attached to a 1.1 first generation Mac Pro with an internal 4 drive raid array, or with a 15″ Mac Book Pro.